Materials:
(2) 8-foot lengths of simple moulding
(3) sheets black foamcore
Optional: Substitute (1) pc. flashing sheet metal (about $4.99) for one sheet of
foamcore to make a magnetic board in center as pictured.

Cut moulding length to fit your wall if needed. Attach first moulding
at bottom w/finish nails and using a level. Slide the foamcore into moulding
groove and then attach upper moulding. Magnet Board Option: Use the same
method, but nail the metal directly to the wall and lay the foamcore edges
overlapping it on top.       Close